1-866-710-GROW Online Customer Service Hours M-F 9:00-5:00 pm
 

Hello Growers!

The GrowBright SmartGrow LED is jam-packed with advanced features that give you ultimate control of your lighting! In this video, we address a common question about these LED grow lights: "How do I use the light's wireless daisy chain feature?"

It's actually quite simple and only takes a few steps.

To set your master light: With the fixture powered ON, press and hold the UP key and POWER key simultaneously. You will see "0 - 00" appear on the screen. Be sure to tap on the first "0" until it is blinking. While blinking, tap the UP key to change the "0" to a "1". This means this is your First Master light.

To set your slave grow lights: With the fixture powered ON, press and hold the DOWN key and POWER key simultaneously. You will see "0 - 01" appear on the screen. Be sure to tap on the first "0" until it is blinking. While blinking, tap the UP key to chance the "0" to a "1". Now, the screen will read "1 - 01". The "01" means this is your first slave to your "1" Master light. As you add more slave lights, you will notice them go in order. (ex. "1 - 01", "1 - 02", "1 - 03"). If you set a second master light, be sure to change your "0 - 00" to "2 - 00". Thus making your slaves "2 - 01", "2 - 02", "2 - 03" and so on.

The benefit to setting you Master and Slave lights is that ALL of the lights that have been set will turn ON at the same time, OFF at the same time, and change spectrum at the same time. It's like having one big grow light for your entire grow tent or grow room!

Good Growing!!