Light Rail Grow Tent Hangers – 4 Pack
Rail Hanger Brackets are simply the easiest solution to hanging the light mover Rails of LightRail 3.0, 3.5, 4.0, and 4.20 onto the support bars of an indoor grow tent or greenhouse. And, they come in packages of four. So, one package is needed per light mover rail using two hangers. Or, there are enough hangers to hang two Rails at two per Rail. So, it is complete. Rail Hanger Brackets are compatible with tubing structures up to 1.5 inches in diameter. Also note, Rail Hanger Brackets will position your Rail perpendicular to that support structure.
Important Rail Hanger Brackets Information:
Rail Hanger Brackets are recommended for use with a one-piece, 6’6” (2m) Rail. Or, they are recommended to use with a Rail half, again as a single piece. And, for a 2-piece Rail as comes in LightRail 3.5 or 4.0 Kits, another grow equipment option is to do this. Make a “splint” for your 2-piece Rail where the Rail halves meet. You can do that by sliding your Rail halves together and then drilling them, just at the seam, onto a small piece of wood. And, this will create the splint to give the extra strength needed at the Rail seam for the suspended Rail in the indoor grow tent or greenhouse setting.
Note: Rail Hanger Brackets are NOT compatible with Light Rail 5.0.
There are no reviews yet.