USA Lab 50L Glass Reactor Turnkey System
The USA Lab 50L Single Jacketed Glass Reactor turnkey system is the best quality reactor kits on the market. Start processing your own extracts without paying more than you should for a quality system. Bring your lab to the next level, and get started with a USA Lab single jacketed reactor.
Model: JR50-VBTK
MPN: JR50-VBTK
-
Overview
USA LAB JR50-VBTK 50L SINGLE JACKETED GLASS REACTOR SYSTEM
The JR50-VBTK comes with a USA Lab 50L UHC-20/40 Heater chiller that can bring your reactor down to a freezing temperature of -40°C and all the way back up to the high temperature of 200°C. This allows users to have accurate temperature control and a large range of temperature for a variety of applications. With each kit comes the MD 4C NT 2.2CFM Chemistry Diaphragm Pump, a top tier vacuum pump from Vacuubrand.
The JR50-VBTK Turnkey System Includes the Following:
1pc: USA Lab 50L Single Jacketed Reactor JR-50
1pc: USA Lab 250L -40°C to 200°C Heater Chiller UHC-50/40
1pc: USA Lab 50L -30°C Chiller DLSB-30/30
1pc: Vacuubrand MD 4C NT 2.2CFM Chemistry Diaphragm Pump
JR-50 FLOW CHART
JR-50 REACTOR SPECIFICATIONS
• Glass Material: GG-17 Borosilicate Glass
• Reaction Vessel Capacity: 50L
• Material Flask Capacity: 5L
• Fluid Jacket Capacity: 13L
• Rotary Speed: 0-450RPM
• Glass Temperature Range: -80°C to 250°C / -112°F to 482
• Power Requirements: 110V 60Hz 15A Single Phase
• Stirrer Wattage: 90W
• Vacuum Level: Under 0.098Mpa
• Dimensions: 41″L x 23″W x 90″H
• Weight: 205lbs
• Speed Regulation: Digital Step-Less
• Condenser and Feed Valve Barbs: 10MM – 3/8″
• Bottom Drain Port: 35MM – 1 3/8″
• Receiving Flask Barb: 16MM – 5/8″
• Fluid Connection: 16MM – 5/8″
UHC-50/40 HEATER CHILLER SPECIFICATIONS
• Reservoir Capacity: 12L
• Temperature Range: Room Temperature to -40°C to 200°C
• Power Requirements: 220V 60Hz 40A 6000W Single Phase (unit must be hard wired)
• Heating Wattage: 6kW
• Refrigerating Wattage: 2kW
• Circulating Pump Wattage: 280W
• Temperature Accuracy: +/- 2°C
• Pump Flow: 35L/Min
• Pump Pressure: 4Kpa
• Connection Size: 3/4″
• Dimensions: 28″ x 26″ x 44″
• Weight: 264lbs
DLSB-50/30 HEATER CHILLER SPECIFICATIONS
• Reservoir Capacity: 50L
• Reservoir Dimensions: 17.7″ x 13.7″
• Temperature Range: Room Temperature to -30°C to -22°F
• Power Requirements: 220V 60Hz 20A 2800W Single Phase
• Refrigerating BTUs: 12,000 BTU – 25,500 BTU
• Circulating Pump Wattage: 100W
• Temperature Accuracy: +/- 0.5°C
• Pump Flow: 30L/Min
• Pump Pressure: 2.2 bar
• Connection Size: 5/8″
• Refrigerant: R404
• Dimensions: 31″ x 26″ x 46″
• Weight: 174 lbs
*-30°C Temperatures are tested under empty load.
